Home | Sensors&Transmitters| Gas Sensor| Electrochemical Gas Sensors

Hydrogen Chloride Sensor (HCL Sensor) - HCL-B1

• Range: 100ppm HCl limit of performance warranty
• Sensitivity: 150 to 250 nA/ppm in 25ppm HCl
• Response time t90: < 200 (s) from zero to 25ppm HCl
• Resolution: < 0.1 RMS noise (ppm equivalent)
• Temperature range: -30 to +50°C
• Pressure range: 80 to 120 kPa
• Humidity range: 15 to 90 % rh continuous
• Weight: < 13 g

  • Model Number: HCL-B1
  • Data Sheet: Date Sheet File
Quantity:
- +
Inquire Now Add to cart
  • Hydrogen Chloride Sensor (HCL Sensor)
  • Hydrogen Chloride Sensor (HCL Sensor)
  • Hydrogen Chloride Sensor (HCL Sensor)
Mouse over image to zoom

Product Specification

HCL-B1 Hydrogen Chloride Sensor HCL Sensor Description
Alphasense is expanding its line of electrochemical toxic gas sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.

Hydrogen Chloride (HCl)/Hydrogen Bromide (HBr)
The HCL sensor also detects Hydrogen Bromide (HBr). These HCL sensors are zero biased for easier use.
Available in A and B series.

HCL-B1 Hydrogen Chloride Sensor HCL Sensor PERFORMANCE
Sensitivity
 nA/ppm in 25ppm HCl
 150 to 250
Response time
 t90 (s) from zero to 25ppm HCl
 < 200
Zero current
 ppm equivalent in zero air
 0 to 3
Resolution
 RMS noise (ppm equivalent)
 < 0.1
Range
 ppm HCl limit of performance warranty
 100
Linearity
 ppm error at full scale, linear at zero, 40ppm HCl
 0 to 6
Overgas limit
 maximum ppm for stable response to gas pulse
 200



HCL-B1 Hydrogen Chloride Sensor HCL Sensor LIFETIME
Zero drift
 ppm equivalent change/year in lab air
 nd
Sensitivity drift
 % change/year in lab air, monthly test
 nd
Operating life
 months until 80% original signal (12 month warranted)
 nd



HCL-B1 Hydrogen Chloride Sensor HCL Sensor ENVIRONMENTAL
Sensitivity @ 0°C
 % (output @ 0°C/output @ 20°C) @ 25ppm HCl
 80 to 95
Sensitivity @ 50°C
 % (output @ 50°C/output @ 20°C) @ 25ppm HCl
 100 to 108
Zero @ -20°C
 ppm equivalent change from 20°C
 < +0 to -1.0
Zero @ 50°C
 ppm equivalent change from 20°C
 < +0.5 to +2.5



HCL-B1 Hydrogen Chloride Sensor HCL Sensor CROSS SENSITIVITY
H2S   sensitivity
 % measured gas @ ppm H2S
 < 280
NO2   sensitivity
 % measured gas @ ppm NO2
 < -150
Cl2     sensitivity
 % measured gas @ ppm Cl2
 < -100
NO     sensitivity
 % measured gas @ ppm NO
 < 2
SO2   sensitivity
 % measured gas @ ppm SO2 (transient peak)
 < 1
CO     sensitivity
 % measured gas @ ppm CO
 < 0.1
H2     sensitivity
 % measured gas @ ppm H2
 < 0.1
C2H4 sensitivity
 % measured gas @ ppm C2H4
 < 0.1
NH3   sensitivity
 % measured gas @ ppm NH3
 < 0.1
CO2   sensitivity
 % measured gas @ 5% CO2
 < 0.1



HCL-B1 Hydrogen Chloride Sensor HCL Sensor KEY SPECIFICATIONS
Temperature range
 °C
 -30 to +50
Pressure range
 kPa
 80 to 120
Humidity range
 % rh continuous
 15 to 90
Storage period
 months @ 3 to 20°C (stored in original container)
 6
Load resistor
 Ω (recommended)
 10 to 33
Bias voltage
 mV
 not required
Weight
 g
 < 13

Matched Transmitter board for HCL-B1 HCL Sensor

4-20mA Analogue Transmitter Board
  • Factory calibration, custom-set for immediate use
  • Wide operating voltage range
  • Low RFI susceptibility
Alphasense 4-20 mA analogue transmitter boards provide a cost effective way for Original Equipment Manufacturers to engineer transmitter heads for fixed installation systems.


4-20mA Digital Transmitter Board
   • Factory calibration, custom-set for immediate use
   • Digital zero, sensitivity and temperature compensation
   • Digital and 4-20mA output
   • Biased or unbiased operation
   • Calibration and range change

If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service

Recommended Products