Air Quality Detection Module FAM-001-01 is combined with sensor TGS2600 which detects indoor air quality, it is high sensitivity to low concentration
Inline NDIR bench for CH4 and hydrocarbon monitoring.
Easily add any SPEC Sensor ™ to your design with our Open-Source Digital Gas Sensor Developer Kit.
The Individual Sensor Board (ISB) is designed for use with the Alphasense B4 family of four-electrode gas sensors.
The LuminOx Evaluation Kit has been designed to allow customers to quickly and easily evaluate the LuminOx Oxygen Sensor with minimum effort or design work.
CO-B4 Carbon Monoxide Sensor 4-Electrode. Range:1000 ppm limit of performance warranty. Sensitivity: 420 to 650 nA/ppm at 2ppm CO.
Alphasense PM2.5 Particle Sensor OPC-N2:Micro USB socket allows on-site firmware updates,Onboard data logging using optional 16GB SD card: 12 months’ capture
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
FSM-T-02 is a pre-calibrated module for methane gas alarm which applies TGS2611-E00 sensor together with optimized classic circuit measuring methane gas concent
With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR Ambient Sensor is suitable for applications such as Building Control and Horticulture.
COZIR is an ultra low power (3.5mW), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
MinIR is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
O2S-FR-T2 Short Probe Zirconia Oxygen Sensor. Long life, non-depleting technology. Can be used in high pressure and temperature environments.
The LuminOx Family is a range of factory calibrated optical sensors which measure ambient O2 levels using the principle of fluorescence quenching by oxygen.
NDIR CO2 Sensor SprintIR is a high speed (20 Hz) CO2 sensor, suited for applications: metabolic assessment and analytical instrumentation
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
OX-B431 Oxidising Gas Sensor Ozone + Nitrogen Dioxide 4-Electrode. Range: 20 ppm O3/NO2 limit of performance warranty.
NO2-B43F Nitrogen Dioxide Sensor NO2 Sensor 4-Electrode. Range: 20 ppm NO 2 limit of performance warranty. Sensitivity: -175 to -450 nA/ppm at 2ppm NO2
NO-B4 Nitric Oxide Sensor NO Sensor 4-Electrode. Range: 20 ppm NO limit of performance warranty. Sensitivity: 500 to 850 nA/ppm at 2ppm NO.
H2S-B4 Hydrogen Sulfide Sensor H2S Sensor 4-Electrode. Range: 100 ppm H2S limit of performance warranty. Sensitivity: 1450 to 2050 nA/ppm at 2ppm H2S.
SO2-B4 Sulfur Dioxide Sensor 4-Electrode. Range: 100 ppm limit of performance warranty. Sensitivity: 275 to 475 nA/ppm at 2ppm SO2.
3SP_CO_1000C 15x15 CO Sensor 1000 ppm Package 110-109. Measurement Range: 0 to 1,000 ppm. Long Life. Low Power. Fast Response (< 15 seconds)
Limiting Current Type Sensor Oxygen Sensors SO-E2-960, measuring range 1.00 to 96.0 vol.% oxygen. High accuracy
FSM-T-01 is a pre-calibrated module for methane gas alarm which applies TGS2611 sensor together with optimized classic circuit measuring methane gas concentrati
PID-AH Photoionization Gas Sensor, Target gases: < 10.6 eV VOCs with ionisation potentials . Linear range: 50 ppm isobutylene 3% deviation.
PID-A1 Photo Ionisation Detector, Target gases: < 10.6 eV VOCs with ionisation potentials.Linear range: 300 ppm isobutylene 5% deviation
NDIR CO2 Sensor COZIR LP is a low profile, low power, high performance CO2 sensor. Operating at a 2Hz update rate while only consuming 3mW
LuminOx O2 PPM Sensors Fluorescence-based Optical Series Fluorescence–based optical technology
, Contains no hazardous materials; RoHS & REACH compliant
CO2 Engine ELG is designed to measure and store records of environmental parameters such as CO2, RH and temperature.
Sensor Module CO2 Engine K30 STA is designed to be an OEM module for built-in applications in a host apparatus.
CO2 Engine BLG is designed to measure and store records of environmental parameters such as CO2, relative humidity and temperature.
TO2-133 PPM Oxygen Sensor. General Purpose Trace O2 measurement 0 - 10ppm. Fast Response. Signal Output: 520-1020 uA. Response Time T90: 7s.
TO2-1x PPM Oxygen Sensor. General Purpose Trace O2 measurement 0 - 10ppm. Used in most industrial applications. Signal Output: 285 - 590 uA
OXY-Flex Oxygen Analyser, High accuracy linear output. Can be calibrated in fresh air (20.7% O2 ) or to any other known O2 concentration
O2S-FR-T2-18BM-C-420M Zirconia Oxygen Sensor System. 0-10VDC Analogue output. Oxygen range (analogue output): 0.1-25% O2 or 0.1-100% O2.
O2S-FR-T2-18A Screwfit Zirconium Dioxide Oxygen Sensors. Probe Length 55mm. Long life. Can be used in high pressure and temperature environments.
O2S-FR-T2-18BM-C-420M Zirconia Oxygen Sensor System. 4-20mA Analogue output. Oxygen range (analogue output): 0.1-25% O2 or 0.1-100% O2.
O2S-FR-T2-18BM-C-RS485 Zirconia Oxygen Sensor System. RS485 Digital output. Oxygen range (Modbus RTU): 0.1-100% O2
O2S-FR-T2-18C Screwfit Zirconium Dioxide Oxygen Sensors. Probe Length 28mm. Long life . Can be used in high pressure and temperature environments.
IRC-AT Carbon Dioxide Infrared Sensor Thermoplie Detector
OXY-LC Oxygen Sensor Interface Board, control SST’s range of dynamic oxygen (O2) sensors.Three interface variants available: RS485, 0-10VDC and 4-20mA outputs.
O2I-Flex Oxygen Sensor Interface Board, High accuracy linear output. Can be calibrated in fresh air (20.7% O2 ) or in any other known O2 concentration.
EDAB M1V2-L Electronic board for SENSORE oxygen sensors
GSB - Generic Sensor Board, Electronic sensor interface for oxygen sensors
CSB - Compact Sensor Board, Electronic Sensor Board for oxygen sensors by SENSORE Electronic
The small form-factor, ultra-low power sensor module (ULPSM) produces a linear voltage output proportional to gas concentration.
The Prime1 sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
The NTM SenseH2-R H2 Sensor is intended for use as a hydrogen gas detector in the range of 0.25 to 4% hydrogen in air
NTM SenseH2 Hydrogen Sensor（H2 Sensor） Designed for hydrogen monitoring, this ceramic sensor exhibits a highly sensitive, selective, and rapid response to the p
The Cirius range of sensors use the non-dispersive infrared method to detect the presence of gases.
Cirius 2 is an infrared gas sensor for carbon dioxide, with range 0-5000ppm or 0-5% vol, all metal construction, low power, fast response.
IRC-TX NDIR CO2 Transmitter Board Both 4-20mA and USB output, Uses Alphasense IRC-A1 NDIR cell, Adjustable bulb voltage to optimise long-term stability.
The Prime3 sensor use the non-dispersive infrared method to detect the presence of carbon dioxide
Response time (t90) :< 40s
Temperature range:-20°C to +50°C
Operating life:> 5 years
carbon dioxide sneosr
infrared CO2 sensor Prime3 with linear voltage output, 0-100%VOL, high accuracy
Zero current:ppm equivalent in zero air < ±2.5
Resolution:RMS noise (ppm equivalent) < 1
Electrochemical gas sensor
ETO-A1 Ethylene Oxide Sensor
Electrochemical gas sensor
NO-A1 Nitric Oxide Sensor NO sensor
PH3-A1 Original Alphasense Phosphine Sensor PH3 sensor