With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR Ambient Sensor is suitable for applications such as Building Control and Horticulture.
MinIR is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
COZIR-W/ExploreIR-W is an ultra low power (3.5mW), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
Prime1 High Resolution Infrared Methane (CH4) Sensor, Sensing ranges: 0-100% LEL Methane, 0-100% LEL Hydrocarbons or 0-100% Volume Methane.
Cirius X is an extremely flexible transmitter for NDIR gas sensors providing a robust linear 4-20mA output in response to signals from NDIR gas sensors.
IRC-AT Infrared Carbon Dioxide (CO2) sensor is designed for IAQ, safety, combustion and high CO2 process control applications.
The IRM-AT uses a dual thermopile detector for measuring Methane and other Hydrocarbons in non-explosive environments.
SH-300-NDC Dual Light Wavelength NDIR Carbon Dioxide (CO2) Sensor Module which detects CO2 in the air, Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm.
Prime2 Voltage Output Infrared Carbon Dioxide Gas Sensor, Sensing ranges: 0-5000ppm CO2 up to 0-10%volume CO2.
SH-300-DS Dual Light Wavelength NDIR Carbon Dioxide (CO2) Sensor Module, Measuring Range 0 ~ 3,000 / 5,000 / 50,000 / 100,000 ppm.
SH-300-NDTH NDIR (Non-dispersive Infrared) Carbon Dioxide Sensor Module that detects CO2 in the air. Measuring Range: 0 ~ 3,000 / 5,000 / 10,000 ppm.
Single Beam NDIR CM1106 can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology(NDIR).
IRceL CH4 NDIR Methane (CH4) Gas Sensor for General Purpose Portable Fixed Methane Detection.
The S8-4B CO2 sensor module is designed to serve as a CO2 safety switch when built-in into kerosene heaters. The sensor utilizes reliable and highly accurate in
S8 Residential Miniature Infrared CO2 Sensor Module is a miniature safety switch that can be used in control and alarm applications.
Sensor Module CO2 Engine K30 STA is designed to be an OEM module for built-in applications in a host apparatus.
CO2 Engine ELG is designed to measure and store records of environmental parameters such as CO2, RH and temperature.
CO2 Engine BLG is designed to measure and store records of environmental parameters such as CO2, relative humidity and temperature.
Inline NDIR bench for CH4 and hydrocarbon monitoring.
NDIR CO2 Sensor COZIR LP is a low profile, low power, high performance CO2 sensor. Operating at a 2Hz update rate while only consuming 3mW
High Temperature CO2-Gas Measurement Module for operating temperatures up to 190℃ and external electronics.
Use Dual Beam NDIR technology to improve the long term stability Cost - effective CO2 monitors made with IR-SOC technology Small Module for OEM
IRC-TX NDIR CO2 Transmitter Board Both 4-20mA and USB output, Adjustable bulb voltage to optimise long-term stability.
SG09 Infrared gas sensor is based on bill-LangBo law and ir theory developed, we can accurately detect methane, carbon dioxide, hydrocarbons, etc.
Cirius 2 is an infrared gas sensor for carbon dioxide, with range 0-5000ppm or 0-5% vol, all metal construction, low power, fast response.
Cirius 1- infrared sensor for Methane Hydrocarbons, 0-100% LFL Methane, 0-100% LFL Hydrocarbons and 0-100% volume Methane
The Cirius range of sensors use the non-dispersive infrared method to detect the presence of gases.
MH-410D infrared gas sensor is a miniature universal intelligent sensor, which adopts NDIR theory to detect concentration of CO2 in air and has good selectivity
MH-Z14 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the CO2 in the air.
MH-741A NDIR CH4 sensor, 0~100% VOL, Fast response and resume, Temperature compensation and excellent linear output, Excellent stability
MH-711A Infrared CO2 sensor, 0~100% VOL, High Sensitivity and resolution, Fast response and resume, Temperature compensation and excellent linear output.
IRC-A1 Infrared Carbon Dioxide (CO2) sensor is designed for IAQ, safety, combustion and high CO2 process control applications.
The Prime3 Infrared Carbon Dioxide Sensor use the non-dispersive infrared method to detect the presence of carbon dioxide.
SprintIR NDIR CO2 Sensor is a high speed (20 Hz) CO2 sensor, suited for applications: metabolic assessment and analytical instrumentation.
PrimePell Infrared Methane Sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
COZIR series is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation, portable instruments or solar powered application