Air Quality Detection Module FAM-001-01 is combined with sensor TGS2600 which detects indoor air quality, it is high sensitivity to low concentration
SMT172 is an ultra-low power, high-precision temperature sensor that combines the ease of use with the world’s leading performance over a wide temperature range
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
HTU21DF sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
Inline NDIR bench for CH4 and hydrocarbon monitoring.
humidity sensor HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed
FOP-M260 Fiber Medical Pressure Sensor, High accuracy, EM/RF/MW interference complete immunity.
Liquid Level Sensor LLC101000, Liquid level switches that can detect almost any liquid type; oil or water based.
Easily add any SPEC Sensor ™ to your design with our Open-Source Digital Gas Sensor Developer Kit.
The Individual Sensor Board (ISB) is designed for use with the Alphasense B4 family of four-electrode gas sensors.
AFE circuits are designed for use with the A4 air quality sensors. Connect the AFE with A4 sensors to your multtiplexed ADC.
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.
The LuminOx Evaluation Kit has been designed to allow customers to quickly and easily evaluate the LuminOx Oxygen Sensor with minimum effort or design work.
HS1101LF Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed.
Digital UV Sensor GUVA-C32SM supports integrated functions of ultraviolet light sensors such that can be easily configured and used in user applications.
UV Sensor GUVA-T21GD-U, Gallium Nitride Based Material, Good Visible Blindness. Mainly apply to Full UV Band Monitoring and UV-A Lamp Monitoring.
HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
The Pressure Sensor Module MS5803-14BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measure
HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed.
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications.Flow Range from 0-200 sccm up to 0-1000 sccm.
CO-B4 Carbon Monoxide Sensor 4-Electrode. Range:1000 ppm limit of performance warranty. Sensitivity: 420 to 650 nA/ppm at 2ppm CO.
Alphasense PM2.5 Particle Sensor OPC-N2:Micro USB socket allows on-site firmware updates,Onboard data logging using optional 16GB SD card: 12 months’ capture
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
The FOP-M is a fiber-optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense
The HRXL-MaxSonar-WRMT ignores smaller targets and only reports the range to target with the largest acoustic return.
The LV‑MaxSonar‑EZ1 is a great choice for use where sensitivity is needed along with side object rejection.
FSM-T-02 is a pre-calibrated module for methane gas alarm which applies TGS2611-E00 sensor together with optimized classic circuit measuring methane gas concent
humidity sensor HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable
With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR Ambient Sensor is suitable for applications such as Building Control and Horticulture.
HTU20D is a new digital humidity sensor with temperature output of MEAS. This sensor provides calibrated, linearized signals in digital, I²C format.
• 10 - 1100 mbar absolute pressure
• Low voltage (2.2 to 3.6V)
• 3-wire serial interface
• 16 Bit ADC
• Small size 6.2 x 6.4 mm
• 0 - 30 bar absolute pressure
• Small size 6.2 x 6.4 mm
• Supply voltage 2.2 to 3.6V
• 16 Bit ADC
• 3-wire serial interface
COZIR is an ultra low power (3.5mW), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
MinIR is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
O2S-FR-T2 Short Probe Zirconia Oxygen Sensor. Long life, non-depleting technology. Can be used in high pressure and temperature environments.
The LuminOx Family is a range of factory calibrated optical sensors which measure ambient O2 levels using the principle of fluorescence quenching by oxygen.
NDIR CO2 Sensor SprintIR is a high speed (20 Hz) CO2 sensor, suited for applications: metabolic assessment and analytical instrumentation
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
HTU21D PCBA sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
OX-B431 Oxidising Gas Sensor Ozone + Nitrogen Dioxide 4-Electrode. Range: 20 ppm O3/NO2 limit of performance warranty.
NO2-B43F Nitrogen Dioxide Sensor NO2 Sensor 4-Electrode. Range: 20 ppm NO 2 limit of performance warranty. Sensitivity: -175 to -450 nA/ppm at 2ppm NO2
NO-B4 Nitric Oxide Sensor NO Sensor 4-Electrode. Range: 20 ppm NO limit of performance warranty. Sensitivity: 500 to 850 nA/ppm at 2ppm NO.
H2S-B4 Hydrogen Sulfide Sensor H2S Sensor 4-Electrode. Range: 100 ppm H2S limit of performance warranty. Sensitivity: 1450 to 2050 nA/ppm at 2ppm H2S.
SO2-B4 Sulfur Dioxide Sensor 4-Electrode. Range: 100 ppm limit of performance warranty. Sensitivity: 275 to 475 nA/ppm at 2ppm SO2.
3SP_CO_1000C 15x15 CO Sensor 1000 ppm Package 110-109. Measurement Range: 0 to 1,000 ppm. Long Life. Low Power. Fast Response (< 15 seconds)
Limiting Current Type Sensor Oxygen Sensors SO-E2-960, measuring range 1.00 to 96.0 vol.% oxygen. High accuracy
TOCON-ABC10 Broadband SiC based UV photodetector with integrated amplifier. 0-5 V voltage output, peak wavelength at 290 nm, max. radiation at peak is 18 W/cm2
TOCON-ABC1 Broadband SiC based UV photodetector, 0 - 5 V voltage output, peak wavelength at 280 nm, max. radiation (saturation limit) at peak is 18 nW/cm2
SG01D-5Lens is UV Photodiode with 0.5 mm2 detector area, TO5 housing. 10µW/cm2 peak radiation results a current of approx 350 nA. Responsivity Range: 221-358nm.
SG01M-5Lens UV Photodiode, 11.0 mm² detector area, TO5 housing. 10µW/cm2 peak radiation results a current of approx 140 nA. Responsivity Range: 221 - 358 nm.
FSM-T-01 is a pre-calibrated module for methane gas alarm which applies TGS2611 sensor together with optimized classic circuit measuring methane gas concentrati
PID-AH Photoionization Gas Sensor, Target gases: < 10.6 eV VOCs with ionisation potentials . Linear range: 50 ppm isobutylene 3% deviation.
PID-A1 Photo Ionisation Detector, Target gases: < 10.6 eV VOCs with ionisation potentials.Linear range: 300 ppm isobutylene 5% deviation
NDIR CO2 Sensor COZIR LP is a low profile, low power, high performance CO2 sensor. Operating at a 2Hz update rate while only consuming 3mW
LuminOx O2 PPM Sensors Fluorescence-based Optical Series Fluorescence–based optical technology
, Contains no hazardous materials; RoHS & REACH compliant
Ultrasonic Wind Speed Sensor - CV7-OEM, The validity checks are used to measure head wind vectors for calculations.
CR6241 Reactive AC Power Transducer - 2 Phase, 3 Wire with 4-20 mAdc output. shown with external current transformer.