NX1 CiTiceL 3-electrode Electrochemical Nitric Oxide (NO) Gas Sensor, Automotive sensor with inboard filter, Measurement Range 0-5,000 ppm NO.
NH3 3E 100 Ammonia Sensor (NH3 Sensor), 3 Electrode sensor with organic electrolyte; available in Mini, Classic, 4-Series and 7-Series formats.
7HL CiTiceL Electrochemical Hydrogen Chloride Gas Sensor (HCl Sensor), 3 Electrode compact sensor, Expected Operating Life Two years in air.
4CM CiTiceL Carbon Monoxide Sensor (CO Sensor), 3 electrode miniature sensor with acid gas filter, Expected Operating Life 2 years in air.
The SF800/6 is the high-pressure version of the SF800 with extra metal enclosure. Flow velocity: 0.5 - 20 litre per minute.
The patented SF800 is an all purpose flow meter with an excellent price-performance ratio. Flow velocity: 0.5 ~ 20 litre per minute.
SH Thin-film Humidity Sensing Element. Low cost, Operating temperature up to 200°C, Short response time, Long-term stability.
RHT Humidity Transmitter. Low cost, Temperature compensation system, 2-wire 4-20 mA output, built-in temperature transmitter, IP65 protection.
RHA Temperature/Humidity Probe for Handheld Meters, Low cost, Voltage output signal, operates w/ H5800, built-in temperature sensor.
CAEL-S16 Probe Humidity and Temperature Transmitter, 0 - 100%RH, 0 -1V/5V/10V, RS485, M12 - 4 pin connector.
CAEL-HT Series Humidity and Temperature Transmitter. 0-100%RH, 4-20mA, 0-10V, RS485, Relay Alarm, Dip switch, Configure adapter, M12 remote probe.
PSMU Series is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm~1.0μm.
PSML Series is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm ~ 1.0μm.
The ORAKEL COD/TOC Sensor uses UV254 light as a surrogate measurement for detecting organics in water.
The ORAKEL Chlorine Sensor range is particularly suited to working in sites where reliability and ease of use are most important.
Single element uncooled VPD PbSe detector, in 2 standard sizes: 1x1 mm2, 2x2 mm2, packaged in SMD or TO-5 (with cap, hermetic) with sapphire window.
850081/850086 Water Quality Meter, 15mm (0.6") Digit Size Display, Operating Temperature: 0°C to 50°C (32°F to 122°F).
These tiny meters are less than ¾" thick and weigh only 4 oz. The controls, display and sensor are all neatly contained and protected within the folding case.
Measure the electro-magnetic field radiation intensity that is produced from welding equipment, microwave oven leakage, and other environmental safety concerns.
Measures dissolved oxygen to determine water quality in environmental testing, labs, industrial and municipal waste water, aquariums and fish hatcheries.
850039 Datalogging Conductivity/TDS Meter, Automatically records up to 16,000 data points in the field along with time and date.
CM9 Electrochemical Carbon Monoxide Sensor, Carbon monoxide detection range: 0-10000ppm.
CM8 Electrochemical Carbon Monoxide Sensor, Carbon monoxide detection range: 0-10000ppm,
651KS22 Single Point Load Cell, Stainless steel, Welded Seal, IP68/IP69K.
651KSGS Single Point Load Cell, Environmentally Sealed, IP66.
651HS Stainless Steel Single Point Load Cell, Welded Seal, IP68/IP69K. Rated Capacities: 6kg, 12kg, 20kg, 30kg, 50kg, 60kg.
563RS Single Ended Beam Load Cell, Stainless steel, Welded Seal, IP68. Rated Capacities: 5kg, 10kg, 20kg, 50kg, 100kg, 200kg, 350kg, 500kg.
363YH Compression Load Cell, Alloy steel, Welded Seal, IP67. Rated Capacities: 1t, 2t, 3t, 5t, 10t, 20t, 30t, 50t, 100t, 150t, 200t, 300t. CE and RoHS certified
276EH Compression Load Cell, Alloy steel, Environmentally Sealed, IP67. Rated Capacities: 5t, 10t, 25t, 50t, 100t.
266AA Compression Load Cell, Aluminum, Environmentally Sealed, IP66.
266AH Compression Load Cell, Alloy steel, Welded Seal, IP67.
108CA Single Point Load Cell, Aluminum, IP66. Rated Capacities: 10kg, 20kg,30kg, 60kg, 100kg, 150kg, 200kg, 250kg, 300kg, 500kg, 600kg, 750kg, 1t.
108BA Single Point Load Cell, Aluminum, IP66. Rated Capacities: 3kg, 6kg, 7kg, 10kg, 15kg, 20kg, 30kg, 35kg, 40kg, 45kg, 50kg, 60kg, 75kg, 100kg, 150kg.
106BH Canister Load Cell, Alloy steel, Welded Sealed, IP67. Rated Capacities: 100t, 200t, 500t. CE and RoHS certified.
106AH Canister Load Cell, Alloy steel, Welded Sealed, IP67. Rated Capacities: 5t, 10t, 20t, 30t, 50t. CE and RoHS certified.
101BH S-Beam Load Cell, Alloy steel, Environmentally Sealed, IP67. Rated Capacities: 50kg, 100kg, 200kg, 300kg, 500kg, 1t, SE2t, 2t, 3t, 5t, 10t.
101AH S-Beam Load Cell, Alloy steel, Environmentally sealed, IP65. Rated Capacities: 1kg, 2kg, 3kg, 5kg, 10kg, 20kg, 30kg.
Combustible gas detector G-series for wall mounting, High accuracy, selectivity and reliability, IP65 enclosure with quick locking screws.
NTYG Series Pressure Sensors can be widely used in industrial, aviation, aerospace, automotive, medical and other fields of refrigeration.
TF-LP01 type Laser PM2.5 Sensor is a small module for detection of particles in the air with scattering principle.
PDSM010 Particle Sensor Module detects approx. 1μm particle such as house dust, pollen, germs, dust mites and cigarette smoke.
The carbon monoxide gas monitor is used for safety in laboratories, or facilities requiring safety detection of CO.
This dual sensor monitor is designed for use in areas containing Helium, Argon, and/or Nitrogen, that contain CO2 as well.
IP67 Water Resistant Oxygen Monitor with 10+ Year Sensor, Suitable for remote sampling to 100 feet, 4-20 mA analog output.
Air Check O2 sample draw monitor can reside up to 100ft away from the area to be tested and uses a polyurethane or equivalent 1/4 inch tube to draw the sample.
This is a specialized monitor for use in a vacuum environment. KF25 flange connector, 10+ year Sensor life, Local digital display, 4-20mA output.
An explosion proof monitor is for use in environments that require Class I, div I, Group B,C,D, and div 2 Group E,F, G Enclosures.
The Air Check oxygen deficiency monitor is perfect for facilities using nitrogen, helium, and argon.
This is a specialized monitor for use in a vacuum environment, 3D printer, nitrogen sample line, nitrogen generator, cryogenic enclosures, or gas line.
Air check O2 Deficiency Monitor for Glove Box and Chambers, for the continuous monitoring of glove boxes, fume hoods any sealed chamber areas.
The Air check Ex is a compact gas monitoring system that's ideal for continuously monitoring toxic and corrosive gases in hazardous areas.
The Air check Advantage Methyl Bromide Gas Monitor is a compact, extractive gas monitoring system.
The TD40 Wireless Particle Monitor is well suited to carrying out precise measurements of particle densities in clean and dust free facilities.
AR820 Formaldehyde Gas Detector can be applied in household, offices and any other dwellings.
BJ-86-3A Point Combustible Gas Detector. Detection of gas: Liquefied natural gas. Detection method: FIGARO semiconductor gas sensor.
UM0090 Ultrasonic Rangefinder features high sensitivity, fast response, and excellent anti-interference ability and stability.
T/R55.5-15.5E279Z-L19-01 Piezo Ultrasonic Sensor, It uses ultrasound to measure the distance between the vehicle and the front and rear obstructions.
T/R40-14C279Z-L12-01 Piezo Ultrasonic Sensor. It uses ultrasound to measure the distance between the vehicle and the front and rear obstructions.
DL0001 Laser Dust Sensor is used to measure the concentration of suspended particles in the air with different sizes (including PM2.5).
Novagas2 is an innovative gas sensor for the measurement of CO2, CO, CH4, HC and N2O gas concentrations with automatically temperature compensation.
UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317.
TC-BO3-3 Portable Combustible Gas Detector. Detection of gas: Combustible gases, organic solvents, etc. Measuring range: 0-20% LEL (combustible gases).