UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01S-C5

• UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability
• Active Area A = 0.06 mm2
• TO5 hermetically sealed metal housing, 1 isolated pin and 1 case pin
• 10mW/cm2 peak radiation results a current of approx. 720 nA
• Dark Current: 0.2 fA
• Capacitance: 15 pF
• Responsivity Range: 225 … 287 nm

  • Model Number: SG01S-C5
  • Data Sheet: Date Sheet File
Quantity:
- +
  • UVC-only SiC Based UV Photodiode With Standard DVGW W294
  • UVC-only SiC Based UV Photodiode With Standard DVGW W294
Mouse over image to zoom

Product Specification

SG01S-C5

UVC-only SiC based UV photodiode A = 0.06 mm2


◆ SG01S-C5 UV photodiode General Features


Properties of the SG01S-C5 UV photodiode
• UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability
• Active Area A = 0.06 mm2
• TO5 hermetically sealed metal housing, 1 isolated pin and 1 case pin
• 10mW/cm2 peak radiation results a current of approx. 720 nA


About the material Silicon Carbide (SiC)
SiC provides  the unique property of  extreme  radiation hardness, near-perfect  visible blindness,  low dark  current, high speed and low noise. These features make SiC the best available material for visible blind semiconductor UV detectors. The SiC detectors can be permanently operated at up to 170°C (338°F). The temperature coeffcient of signal (responsivity)  is also  low, < 0,1%/K. Because of the  low noise (dark current  in the fA range), very  low UV radiation intensities can be measured reliably. 


Options
SiC photodiodes are available with seven different active chip areas from 0.06 mm2 up to 36 mm2. Standard version is broadband UVA-UVB-UVC. Four fltered versions lead to a tighter sensitivity range. All photodiodes have a hermetically sealed metal housing (TO type), either a 5.5 mm diameter TO18 housing or a 9.2 mm TO5 housing. Further option is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).


SG01S-C5 UV photodiode Specifications

Parameter Symbol Value Unit
Spectral Characteristics
Typical Responsivity at Peak Wavelength Smax 0.120 AW-1
Wavelength of max. Spectral Responsivity λmax 275 nm
Responsivity Range (S=0.1*Smax) 225 … 287 nm
Visible Blindness (Smax/S>405nm) VB > 1010
General Characteristics (T=25°C)
Active Area A 0.06 mm2
Dark Current (1V reverse bias) Id 0.2 fA
Capacitance C 15 pF
Short Circuit (10mW/cm2 at peak) Io 720 nA
Temperature Coefficient Tc < 0.1 %/K
Maximum Ratings
Operating Temperature Topt -55 … +170 °C
Storage Temperature Tstor -55 … +170 °C
Soldering Temperature (3s) Tsold 260 °C


If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service