Hall Effect Gear Tooth Speed Sensors - GS1005-GS1007 Series

• From near zero speed up to 15 kHz sensing capability
• Vibration: Sinusoidal, 15 g max from 40 Hz to 2 kHz
• Operating Supply Voltage: 5 to 24 VDC
• Supply Current: 3 mA typ., 6 mA max
• Compatible with unregulated power supply
• RoHS compliant
• IP67
• Typical air gap of 1.5 mm

  • Model Number: GS1005-GS1007 Series
  • Data Sheet: Date Sheet File
Quantity:
- +
  • Hall Effect Gear Tooth Speed Sensors
  • Hall Effect Gear Tooth Speed Sensors
Mouse over image to zoom

Product Specification

GS1005 - GS1007 Sensors
Hall Effect gear tooth speed sensor with adjustable anodized aluminum housing

GS1005-GS1007 Series Gear Tooth Speed Sensors Description
The GS1005-GS1007 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output.

GS1005-GS1007 Series Gear Tooth Speed Sensors Features
• From near zero speed up to 15 kHz sensing capability
• 10 bit dynamic threshold direction offers:
   - Automatically adjusting magnetic range
   - Self-compensating to target geometry
• Compatible with unregulated power supply
• RoHS compliant
• IP67
• Typical air gap of 1.5 mm*

GS1005-GS1007 Series Gear Tooth Speed Sensors Typical Applications
• Speedometers
• Anti-lock braking systems
• Exercise equipment
• CNC machine tools

GS1005-GS1007 Series Gear Tooth Speed Sensors Environmental Specifications

Vibration
Sinusoidal, 15 g max from 40 Hz to 2 kHz
Mechanical Shock Resistance
50 g
Maximum Speed Detection
15 kHz
Operating Temperature (GS100501)
-40 ⁰C to 105 ⁰C (-40 ⁰F to 221 ⁰F)
Operating Temperature (GS100502, GS100701)
-40 °C to 125 ⁰C (-40 ⁰F to 257 ⁰F)
Storage Temperature
-40 °C to 125 ⁰C (-40 ⁰F to 257 ⁰F)
Ingress Protection
IP67

GS1005-GS1007 Series Gear Tooth Speed Sensors Electrical Specifications
Operating Supply Voltage
5 to 24 VDC
Maximum Input Voltage
30 VDC
Maximum Reverse Voltage
24 VDC
Supply Current
3 mA typ., 6 mA max         
Output Sink Current
20 mA max
Recommended Pull-Up Resistor
See chart

GS1005-GS1007 Series Gear Tooth Speed Sensors Mechanical Specifications
Housing Material
Anodized Aluminum
Maximum Installation Torque Limit
5.65 Nm (50 in lb) on threads                          
Operating Air Gap / Sensing Distance*  1.5 mm (0.06")
* With recommended target type; see drawing
1.5 mm (0.06")
Sensor Orientation
Not sensitive

Products
Part Number
Thread
Leads
Connector
GS100501
M12-1

12 mm, 4-pin circular mating connector, type IEC 60947-5-2
GS100502
M12-1
20 AWG x 1 m

GS100701
15/32"-32
20 AWG x 1 m


If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service