Long Probe Zirconia Oxygen Sensors - O2S-T6 / O2S-T6-SH

• Oxygen pressure range: 2mbar - 3bar
• Accuracy: 5 mbar max
• Zirconium dioxide (ZrO2) sensing elements
• Long life, non-depleting technology
• Integral heating element
• High accuracy
• Requires an external interface board to operate

  • Model Number: O2S-T6 / O2S-T6-SH
  • Data Sheet: Date Sheet File
Quantity:
- +
  • Long Probe Zirconia Oxygen Sensors
  • Long Probe Zirconia Oxygen Sensors
Mouse over image to zoom

Product Specification

Probe Zirconia Oxygen Sensors Description
The Probe Range of zirconium dioxide oxygen sensors are available in three lengths. Suitable for aggressive and polluted applications such as boiler exhausts. Longer probes are an ideal solution for thicker walled, insulated flue pipes. 

SST’s range of zirconium dioxide oxygen sensors use a unique closed loop measurement system. While the sensor continuously measures the oxygen level, a heartbeat signal is also generated providing an immediate warning of any failures.

Their long operating life is due to the non-depleting sensor cell technology. No reference gas is required and easy single point calibration can be performed in any known gas including fresh air.

The Probe zirconium dioxide oxygen sensors offer standard and fast response times from as little as four seconds. Various probe lengths, cable lengths, and a standard and extended temperature range are available. The Probe zirconium dioxide oxygen sensor offer a linear output signal, a lifetime of up to 10 years (depending on the application), and covers an oxygen range from 0.1 to 100% O₂.

O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors FEATURES
• Zirconium dioxide (ZrO2) sensing elements
• Long life, non-depleting technology
• Integral heating element
• High accuracy
• Requires an external interface board to operate

O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors BENEFITS
• No reference gas required
• No need for temperature stabilisation
• Two lengths available; 220mm and 400mm

O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors TECHNICAL SPECIFICATIONS

Heater voltage
    Operating
    Standby  
4V DC  ± 0.1V DC  (1.7A)
1.65V DC  (0.7A)
Pump impedance at 700°C
< 6kΩ
Permissible gas temperature
    Standard temperature
    High temperature
-100°C to +250°C
-100°C to +400°C
Gas flow rate
0 - 10 m/s
Repetitive permissible acceleration
5g
Incidental permissible acceleration
30g

O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors OUTPUT VALUES
Oxygen pressure range
2mbar - 3bar max
Accuracy
5 mbar max
Internal operational temperature
700°C
Response time (10 - 90% step)
< 15s
Warm up time (prior to sensor operation)
100s
Warm up time (from stand by)
20s
Output stabilisation time
~ 180s

O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors OUTLINE DRAWING


O2S-T6 / O2S-T6-SH Zirconia Oxygen Sensors ORDER INFORMATION
Generate your specific part number using the convention shown below. Use only those letters and numbers that correspond to the sensor options you require — omit those you do not.


If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service