Home | Sensors&Transmitters| Position Sensors

Non-contact Intrinsically Linear Angle Position Sensors - AN8 Series

• Angular position sensor with high tolerance for misalignment
• Non-contact angular position sensing and full 360° rotation
• Available with Delphi connector or 12” (305 mm) wire leads
• Vibration: 6g sinusoidal, 8 g RMS axial; 40Hz – 2 kHz all 3 axes
• RoHS compliant
• IP67
• Maximum air gap of 5.5 mm (0.22”)

Model Number: AN8 Series
Data Sheet:

Quantity:: - +

Inquire Now Add to cart

Mouse over image to zoom

Product Specification

AN8 Sensors
Programmable, non-contact magnetic position sensors capable of continuous rotation

AN8 Series Angle Position Sensors Description
The AN8 Series sensors are non-contact, intrinsically linear angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft.

AN8 Series Angle Position Sensors Features
• Angular position sensor with high tolerance for misalignment
• Non-contact angular position sensing and full 360° rotation
• Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
• No mechanical interface means no parts to wear out or jam
• Available with Delphi connector or 12” (305 mm) wire leads
• RoHS compliant
• IP67
• Maximum air gap of 5.5 mm (0.22”)*

AN8 Series Angle Position Sensors Typical Applications
• Implement (fork lift, agricultural trailer hitch, etc.) position sensing
• Steer, throttle by wire
• Gear selection
• Zero-contact encoder alternative
• Replacement for smart bearings
• Outboard trim sensing

AN8 Series Angle Position Sensors Environmental Specifications

Vibration	6g sinusoidal, 8 g RMS axial; 40Hz – 2 kHz all 3 axes
Operating Temperature	-40 °C to 125 °C (-40 °F to 257 °F) with Delphi connectors, -40 °C to 150 °C (-40 °F to 302 °F) with wire leads
Storage Temperature	-40 °C to 150 °C (-40 °F to 302 °F)
Ingress Protection	IP67

AN8 Series Angle Position Sensors Electrical Specifications

Input Voltage	5.0 VDC ± 10%
Output Voltage	10% to 90% of input (see graph for voltage vs. rotation angle characteristics)
Input Current	14 mA typ., 16 mA max.
Output Current	-8 mA to 8 mA
Output Accuarcy	±3.5%
Output Linearity	±3.5%
Maximum Overvoltage	16 VDC
Absolute Max. Output Current	±30 mA
Output Type	Analog (PWM available)

AN8 Series Angle Position Sensors Mechanical Specifications

Housing Material	Glass Reinforced Plastic
Mechanical Travel	0° to 360° (continuous)
Mating Connector	Delphi Metri-pak 150.2 12162185; Terminal 1214075 / 2047680
Maximum Air Gap* *with AS500106 magnet carrier	5.5 mm (0.22")
Maximum Center-To-Center Offset	2 mm radial (magnet to center)

AN8 Series Angle Position Sensors Products

Part Number (Sensor)	Sensor (incl. AS500106 magnet)	Sensing Range	Wires	Connectors	Terminals
AN820001	CU103601	180°	N/A	Packard Metri-pack	1214075 / 2047680
AN820002	CU103602	360°	N/A	Packard Metri-pack	1214075 / 2047680
AN820003*	CU103603	45°	N/A	Packard Metri-pack	1214075 / 2047680
AN820031	--------	180°	18 AWG x 305 mm (12")	N/A	N/A
AN820032	--------	360°	18 AWG x 305 mm (12")	N/A	N/A
AN820033*	--------	45°	18 AWG x 305 mm (12")	N/A	N/A