IMR 1050X Combustion Gas Analyzer, Measures: Differential flue temperature, Carbon Dioxide (CO2), flue & ambient carbon monoxide (CO) & Differential Pressure.
CP01 fixed gas detector is designed for use in the non-explosive environment to monitor gas concentration of combustible gas (LEL) or toxic gas.
The ART gas detector is a state-of-the-art, fixed, non-dispersive infrared refrigerant transmitter used to detect a wide range of refrigerant gases.
DCC Dual Channel Controller is a comprehensive and dependable, self-contained system for monitoring toxic and combustible gases and PID TVOCs.
The FCS Flexible Control System is a sophisticated, high performance controller that offers up to 128 gas channel configurations.
The FCS-8 Flexible Control System is a high performance controller that of ers up to 8 gas channel configurations.
The QCC Quad Channel Controller offers four channel configurations for monitoring toxic, combustible and/or refrigerant gases
RLD10 Detect leaking refrigerant using the high sensitivity mode then switch to the low sensitivity mode to pinpoint its source.
IMR EX660 SMART Sensor Gas Detector, easy for replacement and maintenance. Target gas: combustible gas, toxic gas, Oxygen, VOC.
IMR EX610 SMART Sensor Gas Detector, easy for replacement and maintenance. Combustible gas channel with high-concentration protection function.
The CD200 is small, easy to use and has a 18" long flexible gooseneck with a bright LED tip to find combustible gas leaks in tight areas.
The CD100A is designed to detect combustible gas leaks in residential and small commercial applications.
TSP-16 Series Indoor Air Quality Monitor, Designed for hotels, houses and other public places to detect the indoor air quality.
The IX176 portable single gas detector can make continuous detection to combustible and toxic gases.
The TD40 Wireless Particle Monitor is well suited to carrying out precise measurements of particle densities in clean and dust free facilities.
The IX616 Multi Gas Detector can make continuous detection of O2, CO, H2S, CH4. Durable case suitable for any environment.
The IMR1000 is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc.
G01-CO2-B360D CO2 controller is used for real time detection ambiance CO2, temperature and humidity.
Indoor Air Quality (IAQ) monitor delivers simultaneous real-time measurements of Particles, Gasses and Environmental Conditions.
The 7301-AQM and 7302-AQM Remote Particle Counter and Environmental Monitor measures 0.3 µm to 25 µm particles.
AR820 Formaldehyde Gas Detector can be applied in household, offices and any other dwellings.
The 5301-AQM and 5302-AQM Remote Air Quality Monitor measures and displays particle mass concentrations.
AR8500 Ammonia analyzer is a continuous quantitative analysis of formaldehyde concentration apparatus.
AS8900 multi-gas monitor is capable to use continuously and simultaneously monitoring 4 gases: O2, Combustile gas, CO, H2S.
AR5750B Gas Detector is a device that detects the presence of gases in an area, often as part of a safety, For detect combustible, flammable and toxic gases...
AR8200 Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD.
15J(S)/30J(D)-P1 Gas Sensor Transmitter, CANbus, 4~20mA output, Data logging, Robust and weather-proof.
GDS-DEFENDER Flammable/Toxic/Oxygen/Refrigerant Gas Alarm for use in commercial and light industrial applications, such as laboratories, boiler plant rooms...
GDS10/GDS10+ Single Point Gas Sensor, Flammable, Oxygen or Toxic Gases,Compact size, Single stage alarm, 4~20mA analogue output.
SD14 (SD10H) 10-Year Sealed Lithium Battery Power Smoke Alarm, Advanced photoelectric sensing technology offers high sensitivity.
SD11 10-Year Sealed Lithium Battery Power Smoke Alarm, Advanced photoelectric sensing technology offers high sensitivity.
SD12 10-Year Sealed Lithium Battery Power Smoke Detector Fire Alarm, Auto-check malfunction, Low battery warning.
SD13 10-Year Sealed Lithium Battery Power Smoke Alarm, Advanced photoelectric sensing technology offers high sensitivity.
CO03D/CD12 Carbon Monoxide Alarm (CO Alarm), Figaro electrochemical sensors, high accuracy and sensitivity, Strong anti-interference ability.
SC05E 5-Year Sealed Lithium Battery Power Combination Smoke/CO Alarm, Smoke & carbon monoxide dual detection, Strong anti-interference ability.
SC05F 5-Year Sealed Lithium Battery Power Combination Smoke/CO Alarm, Smoke & carbon monoxide dual detection.
CD11 (CO03B) Carbon Monoxide Alarm (CO Alarm), Strong anti-interference ability, Diverse alarm sounds for distinctive CO concentration.
AC/ DC Operated Carbon Monoxide Alarm (CO Alarm) VST-C598IH. Non-radioactive technology for environmental friendly.
SPARROW is a wearable environmental health and safety monitor that measures Carbon Monoxide (CO)
F2000TSM-CO-C101 is specifically designed to detect and transmit carbon monoxide level in the enclosed or semi-enclosed car parks.
G09-O3 Series Ozone Monitor and Controller with Modbus interface and 1X analog +2X dry contact outputs
F2000IAQ-VOC Indoor Air Quality Monitor / Controller is specially designed to detect indoor air quality in offices and home environments.
F2000TSM-VOC series Indoor Air Quality Detector/Controller is specially designed to detect room IAQ level.
G02-VOC monitor is specially designed to detect indoor air quality in offices and home environments.
G01-CO2-B3 Series Carbon Dioxide Monitor and Alarm, CO2 + Temperature and Humidity Detection and Monitoring.
G01-CO2-N10C/30C BACnet Carbon Dioxide (CO2) Detector/Transmitter with Temperature and Humidity Option.
G01-IAQ series is specially designed for real time measuring ambiance carbon dioxide level, air quality (VOC's), temperature and relative humidity.
TG9xx6x Carbon Dioxide Duct Probe Transmitter is designed for detection carbon dioxide in air ducts of HVAC systems.
TG9XX8 CO2 Duct Transmitter, Designed for real time detecting carbon dioxide, temperature or relative humidity in air ducts.
TGP Series Carbon Dioxide Detector/Transmitter is specially designed to Real-time detect CO2 level of indoor environment.
F2000TSM-CO2 Series Carbon Dioxide Detector. Real-time detecting CO2 level. Design for HVAC, ventilation systems, offices, or other public places.
F2000TSM-CO2-8013 Carbon Dioxide Detector/Controller for Fan Switch. Real-time detecting CO2 level with wall-mounting type.
F2000TSM-CO2-PID Carbon Dioxide Controller, Application for ventilation systems, BAS and single fan control etc.
G01-CO2-B10C/30C Carbon Dioxide Transmitter, Design for real time measuring ambiance carbon dioxide level and temperature +RH%.
F2000IAQ-CO2-3003D multiple controller. Real-time detecting CO2 level, temperature and humidity with the local programmable control.
F2000IAQ-CO2 Carbon Dioxide Detector/Indicator is used to monitor and alarm CO2 level and room temperature.
F2000IAQ-CO2 monitor/controller is used to monitoring and control room CO2 level, as well as room temperature and humidity.
AS520 Wearable air quality monitoring system providing complete and reliable assessment of the air quality in the immediate vicinity of the wearer.
AS510 Remote Air Quality Monitor. Comprehensive and efficient area air quality monitoring at remote sites.
AS330 Metal Oxide Sensor Management System. Precise management of 8 metal oxide sensors using advanced sensor algorithms.