FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications.Flow Range from 0-200 sccm up to 0-1000 sccm.
The FS8000 requires a power supply of 8~24 Vdc, and provides an analog output of 0.5~4.5 Vdc corresponding to the flow rate from 0 to full scale.
FS4003 has a flow channel diameter of 3 mm. This sensors have a very low pressure loss while it can measure air flow up to 5 SLPM.
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology.
FS1015CL series mass flow sensors are specially designed for medical equipment flow monitor and control applications
FS6122 series mass flow sensors are specially designed for personal ventilators for CPAP (continuous positive airway pressure).
FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments.
MFM2070U is a gas flow sensor with low pressure drop capable of measuring medical gases up to 70 lpm.
MFM2040U is a gas flow sensor with low pressure drop capable of measuring medical gases up to 45 lpm.
MFC2030/MFC2070 High Performance Bi-Directional Digital MEMS Gas Flow Sensor, for Medical gas flow measurement and control...
The Gas Flow Sensor XEN-GFL9722 is a ceramic based thermal sensor. Low cost, small size.
The AWM700 has a high flow range capability in a small package, as well as a 6 ms response time. require a 10 Vdc supply, but consume only 60 mW of power.
The FE-1500-FX Duct Mounted airflow measurement station consists of single or multiple airflow elements, factory mounted and pre-piped in a casing designed
The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork.
The HAF Series is compensated over the temperature range of 0 ℃ to 50 ℃ [32 ℉ to 122 ℉] and operates across a temperature range of -20 ℃ to 70 ℃ [-4 ℉ to 158 ℉]
The AWM1000 series mass flow sensor provides all of the outstanding performance benefits of the standard AWM2000 series in a more cost-effective sensor platform
the AWM2000 Series, the dual Wheatstone bridges control airflow mea-surement. used to increase the gain and to introduce voltage offsets to the sensor output.
Honeywell Zephyr™ HAF Series sensors provide a digital interface for reading airflow over specified full-scale flow and compensated temperature ranges. The ther
the AWM2000 Series, the dual Wheatstone bridges control airflow measurement. used to increase the gain and to introduce voltage offsets to the sensor output
AWM5000 Series Microbridge Mass Air flow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while in
AWM5000 Series Microbridge Mass Air flow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM)
AWM43600V Honeywell Air flow Sensors, Fast response time, Analog output, Low power consumption
Air Flow 1 Sensor (NC) provides real-time recognition of air flow stoppage. This Air Movement Sensor is normally closed and includes a mounting clip and clamp.
Air Flow 2 Sensor (NO) provides real-time recognition of air flow stoppage. Typical use is to monitor continuous air flow in an HVAC duct,