Home | Sensors&Transmitters| Gas Sensor| O2 Sensors

Oxygen Sensor - GPR-12-333-H

This advanced galvanic type oxygen sensor offers excellent stability and accuracy under stringent applications.

Model Number: GPR-12-333-H
Data Sheet:

Quantity:: - +

Mouse over image to zoom

Product Specification

Technical Specifications：

Measuring Range	0-100% O2
Signal Output (1)	590-950 µA
Response Time 90%	3 Seconds
Accuracy Full Scale (2)	+ 1%
Accuracy FS Over Operating Range (3)	+ 5%
Drift % Signal Month (2)	< 1%
Linearity (2)	+ 1%
Humidity Non-Condensing	0-99% RH
Temperature Coefficient	2.54%
Operating Temperature	0-45℃
Operating Pressure	Constant 5-30 PSIG
Flow Rate	.1-10 LPM
Expected Life	12-24 Months O2 <1000 PPM
Storage (4)	0-40℃
Warranty (5)	12 Months
Electrical Connections	PCB 2 Ring
Packaging	Polyetylene bag in 3" x 3" x 1.5" paper box

(1) In air @ 25℃and 1 atm. Expected life varies inversely with changes in O2 concentration, temperature, pressure.

(2) Under constant conditions. Calibrate as near sample conditions as possible. Calibrate with 95-100% oxygen for measurements > 40% oxygen.

(3) Once the signal output stabilizes following a step change in temperature.

(4) Recommended 0-40℃. Sensors may be stored at -10 to 55℃ on an intermittent basis only.

(5) Ex-factory unless agreed to in writing. Under normal application conditions sensor is warranted to be free of defects in material and workmanship for the period specified above proved the sensor is properly installed and operated. Analytical Industries Inc. shall not be liable for buyer's negligence,misapplication, alteration or abuse. The sole remedy for a sensor determined to be defective by Analytical Industries Inc. is limited to replacing the defective sensor.

If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service