-
Digital Humidity & Temperature Meter - DT-625
DT-625 is digital Humidity & Temperature Meter with Wet Bulb Temperature& Dew Point temperature.
-
PM2.5 Particle Sensor Module - PDSM010
PDSM010 Particle Sensor Module detects approx. 1μm particle such as house dust, pollen, germs, dust mites and cigarette smoke.
-
Laser PM2.5 Sensor - TF-LP01
TF-LP01 type Laser PM2.5 Sensor is a small module for detection of particles in the air with scattering principle.
-
Remote Particle Counter - P230
The P230 remote particle counter measures 0.3 µm and 0.5 µm with a flow rate of 0.1 CFM (2.83 LPM).
-
UV-B Sensor - GUVB-T11GD-L
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
-
LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor) - LOX-02
LOX-02 LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor), Fluorescence–based optical technology,
Oxygen Measuring Range: 0-25% O2. -
XL-MaxSonar-WRM1 High Performance Ultrasonic Rangefinder - MB7052
MB7052 Ranges from 20cm to 765cm with a 6.7Hz read rate. Pulse-width, analog voltage and RS232 serial. Reports range to largest target. Uses a stability filter.
-
Ultra Low Power Digital Output NDIR CO2 Gas Sensor - COZIR-A
With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR Ambient Sensor is suitable for applications such as Building Control and Horticulture.
-
Photoionization Gas Sensor (PID Sensor) - PID-A1
PID-A1 Photoionization Gas Sensor (PID Sensor) has a linear dynamic range of 50 ppb to 6,000 ppm (Isobutylene), Photo Ionisation Detector.
-
Carbon Monoxide Sensor (CO Sensor) 4-Electrode - CO-B4
CO-B4 Carbon Monoxide Sensor 4-Electrode. Range:1000 ppm limit of performance warranty. Sensitivity: 420 to 650 nA/ppm at 2ppm CO.
-
Oxygen Gas Sensor (O2 Sensor) - O2-M2
O2-M2 Oxygen Gas Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
-
Miniature Digital Relative Humidity and Temperature Sensor - HTU21D
HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
-
Alphasense PM2.5 Particle Sensor - OPC-N2
OPC-N2 Particle Monitor measures PM1, PM2.5 and PM10, augmenting our range of gas and VOC sensors for indoor and urban air quality monitoring.
-
Wireless Particle Monitor - TD40
The TD40 Wireless Particle Monitor is well suited to carrying out precise measurements of particle densities in clean and dust free facilities.
-
Liquid Analytical Sensors - S80
Measure pH, ORP, Specific Ion, Dissolved Oxygen, Turbidity, Conductivity or Resistivity with Model T80 Universal Transmitter.
-
3-electrode Electrochemical Nitric Oxide (NO) Gas Sensor - NX1 CiTiceL
NX1 CiTiceL 3-electrode Electrochemical Nitric Oxide (NO) Gas Sensor, Automotive sensor with inboard filter, Measurement Range 0-5,000 ppm NO.
-
Electrochemical Hydrogen Chloride Gas Sensor (HCl Sensor) - 7HL CiTiceL
7HL CiTiceL Electrochemical Hydrogen Chloride Gas Sensor (HCl Sensor), 3 Electrode compact sensor, Expected Operating Life Two years in air.
-
Ammonia Sensor (NH3 Sensor) - NH3 3E 100
NH3 3E 100 Ammonia Sensor (NH3 Sensor), 3 Electrode sensor with organic electrolyte; available in Mini, Classic, 4-Series and 7-Series formats.
-
Electrochemical Carbon Monoxide Gas Sensor (CO Sensor) - 4CM CiTiceL
4CM CiTiceL Carbon Monoxide Sensor (CO Sensor), 3 electrode miniature sensor with acid gas filter, Expected Operating Life 2 years in air.
-
Low Pressure Flow Meter - SF800
The patented SF800 is an all purpose flow meter with an excellent price-performance ratio. Flow velocity: 0.5 ~ 20 litre per minute.
-
High Pressure Flow Meter - SF800-6
The SF800/6 is the high-pressure version of the SF800 with extra metal enclosure. Flow velocity: 0.5 - 20 litre per minute.
-
Humidity Probe for Handheld Meters - RHA
RHA Temperature/Humidity Probe for Handheld Meters, Low cost, Voltage output signal, operates w/ H5800, built-in temperature sensor.
-
2-wire Humidity Transmitter - RHT
RHT Humidity Transmitter. Low cost, Temperature compensation system, 2-wire 4-20 mA output, built-in temperature transmitter, IP65 protection.
-
Thin-film Humidity Sensing Element - SH
SH Thin-film Humidity Sensing Element. Low cost, Operating temperature up to 200°C, Short response time, Long-term stability.
-
Probe Humidity and Temperature Transmitter - CAEL-S16
CAEL-S16 Probe Humidity and Temperature Transmitter, 0 - 100%RH, 0 -1V/5V/10V, RS485, M12 - 4 pin connector.
-
Multi-function Humidity and Temperature Transmitter - CAEL-HT Series
CAEL-HT Series Humidity and Temperature Transmitter. 0-100%RH, 4-20mA, 0-10V, RS485, Relay Alarm, Dip switch, Configure adapter, M12 remote probe.
-
PM2.5 / PM1.0 Particle Sensor - PSML Series
PSML Series is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm ~ 1.0μm.
-
PM2.5/PM1.0 Particle Sensor - PSMU Series
PSMU Series is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm~1.0μm.
-
ORAKEL Chlorine Sensor - MMS-D010
The ORAKEL Chlorine Sensor range is particularly suited to working in sites where reliability and ease of use are most important.
-
ORAKEL COD/TOC Sensor Waste Analyser - MMS-D016
The ORAKEL COD/TOC Sensor uses UV254 light as a surrogate measurement for detecting organics in water.
-
LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor) - LOX-02
LOX-02 LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor), Fluorescence–based optical technology,
Oxygen Measuring Range: 0-25% O2. -
Oxygen Gas Sensor (O2 Sensor) - O2-M2
O2-M2 Oxygen Gas Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
-
Pre-calibrated Combustible Gas Sensor Module - FSM-10H-01
FSM-10H-01 is Pre-calibrated Module for LPG gas alarm which applies TGS2610-D00 sensor together, it features durability and stability.
-
Dust Sensor Module for Air Quality Monitor - DSM501B
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
-
Nitrogen Dioxide Sensor (NO2 Sensor) 4-Electrode - NO2-B43F
NO2-B43F Nitrogen Dioxide Sensor NO2 Sensor 4-Electrode, 32mm diameter package, the best choice for fixed site applications.
-
Ultra Low Power Carbon Dioxide Sensor NDIR CO2 Sensor - COZIR-W/ExplorIR-W
COZIR-W/ExplorIR-W is an ultra low power (3.5mW), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC.
-
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor - MisIR
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
-
Photoionization Gas Sensor (PID Sensor) - PID-AH
PID-AH Photoionization Gas Sensor (PID Sensor) has a linear dynamic range of 1 ppb to 50 ppm (Isobutylene). Photo Ionisation Detector.
-
Low Power High Performance NDIR CO2 Sensor - MinIR/ExplorIR-M
MinIR is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
-
Trace Oxygen Sensor (PPM) - TO2-2x
TO2-2x PPM Oxygen Sensor. Trace O2 measurement when CO2 > 0.1%. Use when acid gases are present (CO2, HCl, HCN, etc.). Signal Output: 285 - 590 uA.
-
15x15 Carbon Monoxide Sensor 1000 ppm Package 110-109 - 3SP_CO_1000 C
3SP_CO_1000 C 15x15 CO Sensor 1000 ppm Package 110-109. Measurement Range: 0 to 1,000 ppm. Long Life. Low Power. Fast Response (< 15 seconds).
-
Dust Sensor by Optical Sensing System - GP2Y1010AU0F
GP2Y1010AU0F Compact Optical Dust Sensor. It detects the reflected light of dust in air, detect very fine particle, Enable to distinguish smoke from house dust.
-
Carbon Monoxide Sensor (CO Sensor) - CO-AF
CO-AF Carbon Monoxide Sensor (CO Sensor), 20mm diameter, the industry standard size for portable gas detectors. Range: 5000ppm CO limit of performance warranty.
-
Low Power Low Profile Carbon Dioxide Sensor NDIR CO2 Sensor - COZIR LP
NDIR CO2 Sensor COZIR LP is a low profile, low power, high performance CO2 sensor. Operating at a 2Hz update rate while only consuming 3mW
-
Air Quality Detection Module - FAM-001-01
Air Quality Detection Module FAM-001-01 is combined with sensor TGS2600 which detects indoor air quality, it is high sensitivity to low concentration
-
XL-MaxSonar-WRL1 High Performance Ultrasonic Rangefinder - MB7066
MB7066 XL-MaxSonar-WRL1 Ranges from 20cm to 1068cm with a 10Hz read rate. Pulse-width, analog voltage, and RS232 serial. Reports range to closest target.
-
LV-MaxSonar-EZ1 High Performance Ultrasonic Rangefinder - MB1010
MB1010 LV-MaxSonar-EZ1 Ultrasonic Rangefinder, Ranges from 6 inches to 254 inches with a 20Hz read rate. Wide detection field. Excellent for people detection.
-
Wireless Ultrasonic Fill-Level Sensor - Clean CAP Plus
Clean CAP Wireless Ultrasonic Fill-Level Sensor Can be attached to any type of bin, container, or tank. enables it to detect both solids and liquids.
-
ToughSonic 30 Ultrasonic Level & Distance Sensor - TSPC-15S Series
TSPC-15S Series ToughSonic 30 Ultrasonic Level & Distance Sensor. Up to 30-ft. (9.1 m) maximum range in IP68 rated, 1-1/2 in. NPT threaded housing.
-
HRXL-MaxSonar-WR Series Ultrasonic Sensor MB7360, MB7363, MB7366, MB7369, MB7380 - MB7383, MB7386, MB7389
HRXL-MaxSonar-WR ultrasonic rangefinder, 1mm resolution, 2.7-5.5VDC operation, a narrow beam pattern, high power output, noise rejection, automatic calibration.
-
UV-B Sensor - GUVB-T11GD-L
UV Sensor GUVB-T11GD-L, Good Visible Blindness, High Responsivity & Low Dark Current. Apply to UV-B Lamp Monitoring Outline and UV-B LED Monitoring.
-
UV-A Sensor - GUVA-S12SD
GUVA-S12SD UV sensor, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV Index Monitoring and UV-A Lamp Monitoring.
-
Waterproof UV Sensor for Pantograph Arc Detection - UV-Arc
UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317.
-
UV Photodiode - EOPD-150-0-3.6
EOPD-150-0-3.6 UV Photodiode , Wide bandwidth and high sensitivity from VUV up to the visible spectrum (150 nm - 550 nm).
-
SiC UV photodetector - TOCON_ABC1
TOCON_ABC1 Broadband SiC based UV photodetector, 0 - 5 V voltage output, peak wavelength at 280 nm, max. radiation (saturation limit) at peak is 18 nW/cm2.
-
Concentrator Lens SiC UV Photodiode - SG01D-5Lens
SG01D-5Lens UV Photodiode, 0.5 mm2 detector area, TO5 housing. 10µW/cm2 peak radiation results a current of approx 350 nA. Responsivity Range: 221-358nm.
-
UV Sensor Module - GUVC-T21GH
UV Sensor GUVC-T21GH, High Sensitivity and Good Solar Blindness. Mainly apply to Pure UV-C Monitoring and Sterilization Lamp Monitoring.
-
Flame Sensors For Gas Burners - UV1 UV2 UV3
UV1 UV2 UV3 Flame Sensors are used for flame detection in gas and mixed fuel (gas and oil) burners.
-
UVC Photodetector with Integrated Amplifier - TOCON_C1
TOCON_C1 UVC photodetector with integrated amplifier, Irradiance limits approx. 14 pW/cm² ... 135 nW/cm², TO5, fire detection, broad field of view.
-
Digital UV Sensor - GUVB-C31SM
UV Sensor GUVB-C31SM supports integrated functions of an ultraviolet light sensor such that can be easily configured and used in user applications.
-
Gas Mass Flow Sensor - FS4008
FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments.
-
MEMS Mass Flow Sensors - FS4001
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology.
-
MEMS Mass Flow Sensors - FS5001L Series
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications. Flow Range from 0-200 sccm up to 0-6000 sccm.
-
MEMS Mass Flow/Clog Sensors - FS7002-B/FS7002-C
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
-
FS8000 Series MEMS Mass Flow Sensors - FS8001/FS8003
The FS8000 requires a power supply of 8~24 Vdc, and provides an analog output of 0.5~4.5 Vdc corresponding to the flow rate from 0 to full scale.
-
Capacitive Humidity Sensor - HS1101/HS1101LF
HS1101LF Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications
-
Temperature Humidity Sensor Module - HTF3223LF
humidity sensor HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed
-
Probe Style Relative Humidity Sensor Module - HM1500LF
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed.
-
Humidity and Temperature Sensor Module - HTG3535CH
HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
-
Digital Temperature and Humidity Sensor Replace Sensirion SHT21 - HTU21
HTU21D is a digital humidity sensor (RH&T) with I2C format output which can pin to pin replace SHT21.
-
Remote Particle Counter - P230
The P230 remote particle counter measures 0.3 µm and 0.5 µm with a flow rate of 0.1 CFM (2.83 LPM).
-
Outdoor UV Index Meter - GUVB-S11GS-AG02.1
GUVB-S11GS-AG02.1 is Outdoor UV Index Meter, mainly apply to UV Index indicating in street, beach, swimming pool, park and so on & UV Index alarm.
-
MF4000 Series Gas Flow Meters - MF4003/MF4008
MF4000 series mass flow meters are designed for applications where manifold flow measurements. The meters can be used for process gas control,samplers..etc
-
Indoor Air Quality (IAQ) Monitor - TSP-16 Series
TSP-16 Series Indoor Air Quality Monitor, Designed for hotels, houses and other public places to detect the indoor air quality.
-
Carbon Dioxide Detector CO2 Detector - AR8200
AR8200 Carbon Dioxide detector can detect the Carbon Dioxide content between the 0~5000ppm and shows the Carbon Dioxide volume with an LCD.
-
UV Radiometer 2.0 - GUVx-T1xGS2-2LA2
GUVx-T1xGS2-2LA2 UV Radiometer use in Air Environments; Display: Absolute Power; Output of Display: Relay, 4-20mA & RS485 (Option). Apply to UV Curing.
-
AC/DC Operated Carbon Monoxide Alarm (CO Alarm) - VST-C598IH
AC/ DC Operated Carbon Monoxide Alarm (CO Alarm) VST-C598IH. Non-radioactive technology for environmental friendly.
-
SMART Sensor Gas Detector - IMR EX660
IMR EX660 SMART Sensor Gas Detector, easy for replacement and maintenance. Target gas: combustible gas, toxic gas, Oxygen, VOC.
-
Battery Operated Carbon Monoxide Alarm (CO Alarm) - CD11 (CO03B)
CD11 (CO03B) Carbon Monoxide Alarm (CO Alarm), Strong anti-interference ability, Diverse alarm sounds for distinctive CO concentration.
-
Mass Flowmeter for Gases - 41403
Nitrous Oxide Mass Flowmeter 41403 (LCD, 0.01-20L/min N2O, Air, O2, N2 1/4" tube) can be used for a multitude of gas flow measurement applications.