Low Power High Performance NDIR CO2 Sensor - MinIR/ExplorIR-M
MinIR/ExplorIR-M is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation and portable instruments.
Low Power Low Profile Carbon Dioxide Sensor NDIR CO2 Sensor - CozIR-LP3
The CozIR®-LP3 provides the user with extensive flexibility, a choice of UART or I²C control interfaces, digital and analogue CO₂ measurements, and a fail-safe
Ultra Low Power Digital Output NDIR CO2 Gas Sensor - CozIR-A
With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the COZIR Ambient Sensor is suitable for applications such as Building Control and Horticulture.
Oxygen Gas Sensor (O2 Sensor) - O2-M2
O2-M2 Oxygen Gas Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
Ultra-Low Power Analog Sensor Module for Ethanol - ULPSM-Ethanol 968-007
The ULPSM converts the Ethanol sensor’s linear current signal output to a linear voltage signal, while maintaining the sensor at its ideal biased operation se
Oxygen Analyzer - OMD-625
The OMD-625 is a cost-effective online intrinsically safe instrument for measuring oxygen continuously with very little maintenance requirements.
Organic Volatile Gas Module - TB600B-TVOC-10
The sensor uses the world's smallest solid polymer sensor from EC Sense, Germany.
Laser PM2.5 Sensor - TF-LP01
TF-LP01 type Laser PM2.5 Sensor is a small module for detection of particles in the air with scattering principle.
Dust Sensor Module for Air Quality Monitor - DSM501A
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
Dust Sensor Module for Air Quality Monitor - DSM501B
Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor.
PM2.5 Particle Sensor Module - PDSM010
PDSM010 Particle Sensor Module detects approx. 1μm particle such as house dust, pollen, germs, dust mites and cigarette smoke.
Alphasense PM2.5 Particle Sensor - OPC-N2
OPC-N2 Particle Monitor measures PM1, PM2.5 and PM10, augmenting our range of gas and VOC sensors for indoor and urban air quality monitoring.
PM2.5 Particle Sensor - OPC-R1
OPC-R1 PM2.5 Sensor, Small size and low power consumption, Reports PM1, PM2.5, PM10 plus histograms, Configurable to specific applications.
PM2.5 Particle Sensor - OPC-N3
OPC-N3 PM2.5 Particle Sensor measures PM1, PM2.5 and PM10. Onboard temperature and humidity sensor.
Oxygen Sensor (O2 Sensor) - O2-A2
O2-A2 Oxygen Sensor (O2 Sensor), 20mm diameter, the industry standard size for portable gas detectors.
Nitrogen Dioxide Sensor (NO2 Sensor) 4-Electrode - NO2-B43F
NO2-B43F Nitrogen Dioxide Sensor NO2 Sensor 4-Electrode, 32mm diameter package, the best choice for fixed site applications.
Ozone Sensor + Nitrogen Dioxide Sensor (O3 Sensor + NO2 Sensor) - OX-B431
OX-B431 Ozone Sensor + Nitrogen Dioxide Sensor 4-Electrode. Range: 20 ppm O3/NO2 limit of performance warranty.
Sulfur Dioxide Sensor (SO2 Sensor) 4-Electrode - SO2-B4
SO2-B4 Sulfur Dioxide Sensor 4-Electrode. Range: 100 ppm limit of performance warranty. Sensitivity: 275 to 475 nA/ppm at 2ppm SO2.
Hydrogen Sulfide Sensor (H2S Sensor) 4-Electrode - H2S-B4
H2S-B4 Hydrogen Sulfide Sensor H2S Sensor 4-Electrode. Range: 100 ppm H2S limit of performance warranty. Sensitivity: 1450 to 2050 nA/ppm at 2ppm H2S.
LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor) - LOX-02
LOX-02 LuminOx Fluorescence Optical Oxygen Sensor (O2 Sensor), Fluorescence–based optical technology,
Oxygen Measuring Range: 0-25% O2.Nitric Oxide Sensor (NO Sensor) 4-Electrode - NO-B4
NO-B4 Nitric Oxide Sensor NO Sensor 4-Electrode, 32mm diameter package, the best choice for fixed site applications.
Carbon Monoxide Sensor (CO Sensor) 4-Electrode - CO-B4
CO-B4 Carbon Monoxide Sensor 4-Electrode. Range:1000 ppm limit of performance warranty. Sensitivity: 420 to 650 nA/ppm at 2ppm CO.
Limiting Current Type Zirconia Oxygen Sensor - SO-E2-960
SO-E2-960 Limiting Current Type Zirconia Oxygen Sensor, TO8 Housing, Measuring range 1.00 to 96.0 vol.% oxygen.
Limiting Current Type Zirconia Oxygen Sensor - SO-E2-250
SO-E2-250 Limiting Current Type Zirconia Oxygen Sensor , TO8 Housing, Measuring range 0.10 to 25.0 vol.% oxygen.
Zirconia Oxygen Sensor System - O2S-FR-T2-18BM-C-010V
O2S-FR-T2-18BM-C-010M Zirconia Oxygen Sensor System. 0-10VDC Analogue output. Oxygen range (analogue output): 0.1-25% O2 or 0.1-100% O2.
Short Probe Zirconia Oxygen Sensors (Zirconia O2 Sensor) - O2S-T2 / O2S-FR-T2
O2S-FR-T2 Short Probe Zirconia Oxygen Sensor, Long life, non-depleting technology. Can be used in high pressure and temperature environments.
Air Contaminants sensor - TGS2600
Features of Air Contaminants sensor TGS2600
low power consumption,
High sensitivity to gaseous air contaminants,
Long life and low cost,
TGS2600Carbon Monoxide sensor - TGS5042
Applications:
Residential and commercial CO detectors;
CO monitors for industrial applications;
Fire detectionOxygen sensor - KE-25
Features:
1) Long life :KE-25 - 5 years
2) Low cost; Stable output signal
3) Operates in normal ambient temperatures
4)testing O2
5)oxygen sensorMethane sensor - TGS2611
Features of methane sensorTGS2611:
Long life, Small size;
Low power consumption;
High sensitivity to methane;
Uses simple electrical circuit;
CH4 sensCombustible gases sensor - TGS2610
Features of gas sensor TGS2610:
1) Low power consumption
2) Long life and low cost
3) Uses simple electrical circuit
4) Small size
5)LP sensorAlcohol sensor - TGS2620
Features of gas sensor TGS2620:
1) Small size
2) Low power consumption
3) Long life and low cost
4) Uses simple electrical circuit
5)Alcohol sensorThermal Conductivity Sensor for miniature Pirani gauge - MTCS2300
•Leak detection
•Propulsion
•Semiconductor manufacturing (e.g., sputtering chambers)Maxell Oxygen Sensor - SK-25
The Maxell Oxygen Sensor SK-25 is a unique galvanic cell type oxygen sensor.
Miniature CO2 sensor module - LP8
Miniature CO2 sensor module for battery-powered applications. A wide supply voltage range enables a variety of battery options.
CO2 & Temperature & Humidity Sensor - SCD30
The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30.
Compact Optical Dust Sensor - GP2Y1010AU0F
GP2Y1010AU0F Compact Optical Dust Sensor. It detects the reflected light of dust in air, detect very fine particle, Enable to distinguish smoke from house dust.
Low Power NDIR CH4 sensor - FlameIR-ME1
Low Power NDIR CH4 sensor using state-of-the-art solid-state LED optical technology
Oxygen (O2) Gas Sensor for Industrial Safety - 4OxLL
4OxLL Oxygen O2 gas sensor for Emissions, 0-25% vol O2
Zirconia Oxygen Sensor System - O2S-FR-T2-18BM-C
O2S-FR-T2-18BM-C-420M Zirconia Oxygen Sensor System. 4-20mA Analogue output. Oxygen range (analogue output): 0.1-25% O2 or 0.1-100% O2.
Micro Thermal Conductivity Sensor for Gas - MTCS 2200
The thermal conductivity gas sensor is manufactured on silicon with thin film deposition and silicon micro-machining techniques.
Industrial Gas Sensors - CRIR M1
Standard range of 400 ppm to 2000 ppm, up to 10000 ppm extended range. Accuracy of ±40 ppm ±3% of reading and ±50 ppm ±5% of reading.
Novagas2 Compact Infrared Gas Module - NG2 Series
Novagas2 is an innovative gas sensor for the measurement of CO2, CO, CH4, HC and N2O gas concentrations with automatically temperature compensation.
Gas Sensor - TED110
The TED1X is a compact and low-power MEMS gas sensor with ASIC for indoor air quality.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-19
These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-10
These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-4
These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-3
These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-2
oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-1
These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.
Oxygen Sensor - AO-09
AO-09 is the oxygen sensor of Aosong Electronics.Offering long life and fast response.
Oxygen Sensor - AO-08
AO-08 is the oxygen sensor of Aosong Electronics.Offering long life and fast response.
Oxygen Sensor - AO-07
AO-07 is the oxygen sensor of Aosong Electronics.Offering long life and fast response.
Oxygen Sensor - AO-02
The AO-02 oxygen sensor is designed to be for various instruments related to oxygen testing.