The pHionics STs Series™ Conductivity is a water quality sensor designed to pair with a datalogger or RTU for real-time data capture.
The pHionics STs Series™ Dissolved Oxygen is a dual-output sensor that pairs with a datalogger or RTU for real-time water quality monitoring.
The pHionics STs Series™ ORP is a low maintenance, dual-output sensor that pairs with a datalogger or RTU for real-time water quality monitoring.
The pHionics STs Series™ pH is a dual-output sensor that pairs with a datalogger or RTU for real-time water quality monitoring.
The oxygen probe for in-line measurement (OIM) consists of a fitting made of
stainless steel with an optical exchange cap (OEC).
The ORAKEL COD/TOC Sensor uses UV254 light as a surrogate measurement for detecting organics in water.
The ORAKEL Chlorine Sensor range is particularly suited to working in sites where reliability and ease of use are most important.
DO6400 & 7400 series dissolved oxygen sensors for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance.
TCS2000 series toroidal inductive conductivity sensors features a wide measurement range and dependable toroidal technology over the range 0-2000 m S/cm.
Plastic Laboratory pH Electrodes, Choose basic, advanced, or premium options based on your application, Accurate and reliable measurements across full pH scale.
Membrane Covered Optical CO2 Sensor for Monitoring. submersible direct reading sensor for natural and industrial waters and sea water.
Resistant to corrosion, coatings and fouling common to contacting conductivity sensors, the TCS series is designed for a trouble free and long service life.
EZO-pH EZO pH Circuit, Range: 0.001 - 14.000, measures the hydrogen ion activity in a liquid. At the tip of a pH probe is a glass membrane.
ENV-50-pH pH probe measures the hydrogen ion activity in a liquid. can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely.
ENV-40-pH pH probe measures the hydrogen ion activity in a liquid. can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely.
EZO-ORP EZO ORP Circuit, Range: -1019.9mV ~ 1019.9mV, ORP probe measures electron activity in a liquid.
ENV-50-ORP Industrial ORP Probe can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely.
ENV-40-ORP ORP Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely.
EZO-DO EZO Dissolved Oxygen circuit is a very sensitive device. This sensitivity is what gives the Dissolved Oxygen circuit its accuracy.
ENV-40-EC-K1.0 Conductivity Probe K 1.0 can be fully submerged in fresh or salt water, up to the BNC connector indefinitely.
ENV-40-DO Dissolved Oxygen Probe, Range: 0 - 100 mg/L, for Standard Lab use, Hydroponics, Food Safe, Environmental monitoring...
EZO-EC EZO Conductivity Circuit, used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.
KAPTA 2000-AC2 probe has been specifically developed to measure free chlorine (HOCl) and temperature.
KAPTA 3000-AC4 In-line Multi-parameter Water Sensor for measure Chlorine, Conductivity, Pressure, Temperature.
WQ730 Turbidity Sensor is a highly accurate submersible instrument for in-situ environmental or process monitoring.
WQ-COND Conductivity Sensors are suitable for measuring conductivity in a wide variety of applications including laboratories, streams, rivers, and groundwater.
WQ-FDO Optical Dissolved Oxygen Transmitter is an instrument designed for measuring dissolved oxygen concentrations in liquids.
WQ401 Dissolved Oxygen Sensor is a rugged and reliable water oxygen measuring device. for stream and lake monitoring, aquaculture studies...
WQ600 (Redox) ORP Sensor is a rugged and reliable ORP/Redox measuring device. for stream and lake monitoring, aquaculture studies...
WQ101 Temperature Sensor is a rugged and reliable device for highly accurate submersible water temperature measurement.
WQ201 pH Sensor for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications.
The IoLine high performance pH electrodes use a patented three chamber system with an iodine reservoir in the iodine/iodide reference electrode.
The IoLine Tris compatible pH electrodes use a patented three chamber system with an iodine reservoir in the iodine/iodide reference electrode.
C4E 4 Electrode Conductivity Sensor, Range 0-200 mS/cm, for Industrial effluent treatment, Urban wastewater treatment, Surface water monitoring...
NTU Nephelometric Turbidity & Temperature Sensor, Range: 0-4000 NTU or 0-4500 mg/L, for Industrial effluent treatment, Industrial effluent treatment...
OPTOD Optical Dissolved Oxygen & Temperature Sensor, Measurement ranges 0.00 to 20.00 mg/L, for Surface water monitoring, waste water treatment...
PHEHT Combination pH, Redox & Temperature Sensor has been designed to perform under hard conditions.
Y4000 Multiparameter Sonde for simultaneous measurement of dissolved oxygen, conductivity, turbidity, pH, Chlorophyll, Blue green algae, and temperature.
Y520-A 4-Electrode Conductivity Sensor, Digital RS-485 output, support MODBUS, Wide range and excellent interference rejection.
Y532-B is a general purpose digital pH sensor for long-term online monitoring, RS485 Modbus digital output.
Y550-B UV254 Sensor is an excellent solution for source water, municipal water and wastewater monitoring.
Y514-A Online Self-cleaning Chlorophyll Sensor for long term deployment for river, lake, pond, and ocean monitoring.
Y504-A Dissolved Oxygen Sensor for sampling, flow cell, ground water and waste water measurements.
Y511-A Automatic cleaning turbidity sensor for Water quality monitoring, waste water testing, process water and aquaculture monitoring.
Shallow Water Hydrogen Micro-sensor is available for insitu measurements of depths of up to 100m and as laboratory version.
PH Shallow Water Sensor with Integrated Electronic Device. Glass and reference electrode in one housing - for depths of up to 1200 m.
Submersible H2S/Sulphide Probe, Sensors for H2S (amperometric micro-sensor), temperature, pH and depth.
Shallow Water Micro-sensor for Dissolved Ozone, For very fast depth profiling with probe systems.
ORP-combined shallow water sensor - OEM version. Platinum and reference electrode in one housing - for depths of up to 1,200 m.
Amperometric H2S Micro-sensor, Determination of H2S and total sulphide in aqueous solutions.
Shallow Water Micro-sensor for Dissolved Hydrogen Peroxide (H2O2), For very fast depth profiling with probe systems.
7-pole-cell conductivity sensor has been developed for interfacing to submersible probe systems.
Shallow Water Micro-sensor for Dissolved Oxygen, For very fast vertical and horizontal profiling.
The FCL series feature amperometric measurement technology. Designed for disinfection applications in water treatment, for, pools, etc.
The CLD series feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc
Laboratory/General Use Plastic and Glass ORP Electrodes, Range of Measurement: +/-2000mV or range of ORP meter, Temperature / Pressure: Max 176F / 50psig
CS8000TC sensor is an easy-to-install conductivity sensor, ideally suited for cooling TDS monitoring.
PHG-202 online pH transmitter, it is possible to meet the most demanding requirements of industrial applications online PH measurement.
RDO-200 Fluorescence Dissolved Oxygen Sensor, used in online dissolved oxygen monitoring for power plant, chemical, industrial wastewater, pharmaceutical...
DOG-200 is one of the dissolved oxygen transmitter, suitable for all occasions need to measure dissolved oxygen, such as water treatment, aquaculture...