Electrochemical Hydrogen Sulfide Sensor H2S Sensor - ME3-H2S

• Detection gas: H2S
• Measurement Range: 0~100ppm
• Max detecting concentration: 500ppm
• Sensitivity: (0.8±0.15) µA/ppm
• Resolution ratio: 0.1ppm
• Response time (T90): <30S
• Repeatability: < 2% output value

  • Model Number: ME3-H2S
Quantity:
- +
  • Electrochemical Hydrogen Sulfide Sensor H2S Sensor
Mouse over image to zoom

Product Specification

ME3-H2S Hydrogen Sulfide Sensor H2S Sensor Principle Introduction
ME3-H2S electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current. 

ME3-H2S Hydrogen Sulfide Sensor H2S Sensor Features
• Low consumption
• High precision
• High sensitivity
• Wide linear range
• Good anti-interference ability
• Excellent repeatability and stability

ME3-H2S Hydrogen Sulfide Sensor H2S Sensor Application
Widely used in industrial and environmental protection fields

ME3-H2S Hydrogen Sulfide Sensor H2S Sensor Technical parameters :

Item Parameter
Detection gas H2S
Measurement Range 0~100ppm
Max detecting concentration 500ppm
Sensitivity (0.8±0.15) µA/ppm
Resolution ratio 0.1ppm
Response time (T90) <30S
Bias voltage 0mV
Load resistance (recommend) 10Ω
Repeatability < 2% output value
Stability (/month) < 2%
Output Linearity linear
Zero drift (-20°C~40°C) ≤ 0.2ppm
Storage temperature -20°C~50°C
Storage Humidity 15%~90%RH
Pressure range (kPa) 90 - 110
Anticipated using life 2 years


If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service