Self Contained Analog Ultrasonic Sensors - RPS-401A/RPS-426A

• Operational Range:
RPS-401A: Adjustable 4 - 40" or 8 - 80"
RPS-426A: Adjustable 8 - 80"
• Power Input: 20 - 30VDC Reverse Polarity Protected
• Input Current: 90mA, Maximum
• Ambient Temperature: 0 - 60ºC or 32 - 140ºF
• Humidity: 0 - 95% Non-Condensing
• Weight: 11 ounces

  • Model Number: RPS-401A/RPS-426A
  • Data Sheet: Date Sheet File
Quantity:
- +
  • Self Contained Analog Ultrasonic Sensors
  • Self Contained Analog Ultrasonic Sensors
  • Self Contained Analog Ultrasonic Sensors
Mouse over image to zoom

Product Specification

RPS-401A/RPS-426A Analog Ultrasonic Sensors

RPS-401A in Plastic Housing
RPS-426A in Stainless Steel Housing

RPS-401A/RPS-426A Analog Ultrasonic Sensors Features
• Adjustable Zero & Span
• Various Sensing Ranges
• Narrow Sensing Beam
• LED Strength Indicator
• Short Circuit Protected
• Reverse Polarity Protected
• Analog Current & Voltage Outputs
• Inverted & Non-Inverted Outputs
• Self Contained Barrel Housing
• Input Voltage 20-30 VDC

RPS-401A/RPS-426A Analog Ultrasonic Sensors Description
The RPS-401A, RPS-426A analog ultrasonic sensor is mounted in a barrel housing and is completely self contained. It is powered by 20-30VDC and is reverse polarity protected. It also has a narrow beam angle which enables it to get into tight places. A flat target can tilt up to 8 degrees and still be detected. The RPS-401A, 426A has 2 short circuit protected analog outputs, 4-20mA and 0-10 VDC. These outputs can easily be inverted and can be scaled over almost any range by means of adjusting the zero control (P1) & span control (P2).

For setup purposes a LED strength indicator is provided. This LED is Green when not detecting and fades to Red as a target moves into place, depending on how much reflected signal is coming back from the target. The frequency of operation for the RPS-401A is 175kHz for the 4-40" and 135kHz for the 8-80". The RPS-426A has an 8-80" range and operates at a frequency of 150kHz. The RPS-401A barrel is constructed of PVC plastic, and the RPS-426A is Stainless Steel. The barrel measures 30mm x 104mm. A standard 6' cable is provided, or a quick disconnect (QD) version is also available.

RPS-401A/RPS-426A Analog Ultrasonic Sensors Specifications

Operational Range:
    RPS-401A
    RPS-426A

Adjustable 4 - 40" or 8 - 80"
Adjustable 8 - 80"
Power Input:
20 - 30VDC Reverse Polarity Protected
Input Current:
90mA, Maximum
Ambient Temperature:
0 - 60ºC or 32 - 140ºF
Humidity:
0 - 95% Non-Condensing
Housing:
    RPS-401A
    RPS-426A

PVC with a PVC sensing face
303 Grade Stainless Steel with PPS & PTFE sensing face
Outputs:

    Analog Current
Analog Current Sourcing Output
4 - 20mA Inverted & Non-Inverted
Load 0 Ohms to 500 Ohms
    Analog Voltage
Analog Voltage Output
0 - 10V Inverted & Non-Inverted
Load 500 Ohms to infinity
Short Circuit Protected
Transducer Frequency:

4 - 40"
175kHz
8 - 80"
135kHz
Response Time:

4 - 40"
16ms
8 - 80"
35ms
Weight: 
11 ounces


PART NUMBER
RANGE
OUTPUT / DESCRIPTION
RPS-401A-40
RPS-401A-80
RPS-401A-40QD
RPS-401A-80QD
4 - 40"
8 - 80"
4 - 40"
8 - 80"
0 - 10VDC and 4 - 20mA Analog
0 - 10VDC and 4 - 20mA Analog
0 - 10VDC and 4 - 20mA Analog - Cable Sold Separately
0 - 10VDC and 4 - 20mA Analog - Cable Sold Separately
RPS-426A-80
RPS-426A-80QD
8 - 80"
8 - 80"
0 - 10VDC and 4 - 20mA Analog
0 - 10VDC and 4 - 20mA Analog - Cable Sold Separately
F32-5001183
F32-5001186

2 meter Cable for QD version, M12 4-Pin 22 AWG
5 meter Cable for QD version, M12 4-Pin 22 AWG


If you cannot find what you want, you can entrust ISweek to source for you. Just click:

Sourcing Service