Sensors&Transmitters
(1848 products)
CO2 Sensor - STC31
The STC31 is a chip-sized gas concentration sensor for high range, accurate CO2 measurements designed for high-volume production.
NDIR CO2 Sensor Module - IRM300
IRM300 is a general infrared CO2 sensor module formed using the NDIR infrared absorption detection principle.
NDIR CO2 sensor - CO2-4K-3M
Our NDIR CO2 sensor has a simple configuration with its infrared radiation source, cell, optical filter and infrared detection part.
Diffusive NDIR gas sensor - IR-SF6 series
IR-SF6 series diffusive infrared sensor is a gas sensor based on the principle of single light source dual wavelengths.
Ultrasonic Sensors - MA40S4R
This product specification is applied to the Receiver of Ultrasonic Transducer (Open Type St
CO2, temperature and humidity room sensor - EE800
The EE800 is optimized for demand controlled ventilation and building automation in residential and commercial applications.
Infrared Gas Sensor - RL-W150
It is widely used in air separation industry, cement and metallurgical industry gas analysis, greenhouse and scientific laboratory gas analysis
Oxygen Sensor - OOA101-1
Short delivery times;Technical support;Made in Germany;15 months warranty
Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OSS-2
The OSS-2 oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Thermal conductivity sensor - TCS205
The resistors are passivated to protect them from the effects of the gas.
Miniature CO2 Sensor Modules - T6703
NDIR CO2 Module designed for residential applications in a compact package.
Intelligent infrared CO2 sensor - HT8101
HT8101 is a digital carbon dioxide sensor based on non-dispersive infrared absorption (NDIR) method.
Fully Calibrated Temperature Sensor - MS1088D
The integrated circuit MS1088 is a fully integrated tested and calibrated digital low power temperature sensor.
Human Body Detector - MS8891A
Ultra-low power, two channel capacitive sensor and touch switch for human body detection.
Legacy Nxp Capacitive Touch Sensors - PCA8885TS/Q900/1
Capacitive 8-channel touch and proximity sensor with auto-calibration and very low power consumption.
Legacy Nxp Capacitive Touch Sensors - PCF8883T/1
Capacitive touch/proximity switch with auto-calibration, large voltage operating range, and very low power consumption.
Carbon Monoxide (CO) Gas Sensor - 5F
• Fast response and recovery time
• Superior long-term performance at temperature and humidity extremes.
Digital, barometric pressure sensor - BMP280
BMP280 is an absolute barometric pressure sensor especially designed for mobile applications.
HVAC Humidity and Temperature Sensor - EE160
Specially designed for HVAC, the EE160 by E+E Elektronik is a cost-effective, highly accurate transmitter for relative humidity and temperature.
Integrated temperature and humidity Sensor - AHT21
AHT21, a new generation of temperature and humidity sensor, has established a new standard in size and intelligence.
Intelligent Infrared Carbon Dioxide Module - MH-Z14A
MH-Z14A NDIR Infrared gas module is a common type, small size sensor.
CO2 sensor module ELT Sensor - D-400
Its Persistent Stability and Temperature Effect Resistance are much favored in warehouse, greenhouse, hospitals etc.
CO2 sensor module ELT Sensor - S-300
As one of the smallest CO2 sensor modules in the world, S-300 sensors show consistent Stability and Temperature change Effect Compensation.
CO2 sensor module ELT Sensor - T-110
As world’s smallest CO2 sensor module, T-110 Series are developed as residential indoor air-quality monitoring application.
Compact MOS sensor - MiCS-2714
The MiCS-2714 is a compact MOS sensor.The MiCS-2714 is a robust MEMS sensor for nitrogen dioxide and leakage detection.
Digital Universal Carbon Dioxide Sensor - DS-CO2-20
DS-CO2-20 is a kind of digital NDIR sensor, which can acquire and calculate the concentration of carbon dioxide in the air continuously .
Digital universal particle concentration sensor - PMS3003
PMS3003 is a kind of digital and universal particle concentration sensor.
SF6 Infrared Sensor - WFS-S1-S
SF6 Infrared Sensor (S1-GP-S) is based on dual-beam dual-wavelength infrared measurement technology and high-precision digital processing technology.
MEMS Thermal Sensors - D6T-44L-06
D6T series sensors can detect human presence by sensing changes in human body temperature with respect to the surrounding temperature.
Thermal Mass Flow Sensor - FS5.0.1L.195
FS5.0.1L.195 Thermal Mass Flow Sensor Optimal for various gas flow applications up to 150 °C.
Airflow Sensors - AWM3300V
The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output.
Digital Gas Sensor Module - Nitrogen Dioxide - N1-21-20
The N1-21-20 sensor integrated with a digital gas module (DGM) is designed for the measurement of NO2 gas concentration.
Mass Air Flow Sensor - PMF2000 Series
General Purpose. Compact form factor. Measure flow rates under 10 SLM. Analog voltage or digital I2C outputs.
Micro-pirani Vacuum Sensors - PVC1000 Series
MEMS micro-Pirani vacuum sensors in TO5 or TO46 metal cans.
Mass Air Flow Sensor - PMF4000 Series
General Purpose. Standard medical cone fittings. Measure flow rates up to 300 SLM. Analog voltage or digital I2C output.
Mass Air Flow Sensor for Medical Devices - PMF5000 Series
For portable medical respiratory devices. Push-to-connect or elbow barb fittings. Analog voltage or digital I2C outputs.
I2C Pressure Sensor - MPM3801
It is widely used for various liquid pressure measurement which is compatible with stainless steel and Viton.
Differential Pressure Sensor - MDM290
MDM290 piezoresistive differential pressure sensor is OEM differential pressure sensor with stainless steel isolated diaphragm.
Digital RS485 HART Pressure Transmitter - MPM4730
MPM4730 pressure transmitter is the highly accurate and stable intelligent pressure transmitter.
Intelligent Level Transmitter - MPM4700
MPM4700 level transmitter is the full stainless steel construction and full-sealed submersible intelligent level transmitter with high accuracy.
ATEX Pressure Transmitter - MPM489
MPM489 product is a pressure transmitter with zero and span adjustable.
High Stable Pressure Sensor - MPM281
MPM281 high stable OEM sensor is the piezoresistive pressure sensor with isolated construction and precise compensation.
Piezoresistive Pressure Sensor - MPM280
MPM280 pressure sensor has a robust housing made of stainless steel, 316L, giving them optimum long-term stability for a range of OEM applications.
Differential Pressure Transmitter for Oxygen Pressure Use - MDM490
Used for the medical and pharmaceutical industries, specializing in gas pressure measurement in medical oxygen production equipment and oxygen storage tanks.
Heat Flux Sensor - gSKIN-XI
Our big size heat flux sensor for superior accuracy and responsiveness. Available both without and with connector.
